7700 9900 Remote Console
7700/9900 Remote Console
The 9900 Remote Console installation program creates a program group called "Remote Console" which includes FDCOPY and Remote Console. The FDCOPY selection launches the FDCOPY function. The Remote Console selection launches the RMCMAIN software.
The FDCOPY function copies the 9900 Remote Console configuration information either onto a floppy diskette or onto a hard disk drive. The copied information can be used by Hitachi Vantara service personnel to diagnose problems related to 9900 Remote Console operations. The FDCOPY function is available to all users, and is used primarily for troubleshooting purposes.
To copy the 9900 Remote Console configuration information to a hard disk
1. Select Start, and then Programs, and then Remote Console, and then FDCOPY. The FD COPY panel will open.
2. Select Compress to HDD to copy the information to a hard drive.
3. The FD Copy program compresses the files. The status of the compression is displayed in the Progress panel.
4. Once the copying is finished, the FDCOPY Completed panel will display.
To copy the 9900 Remote Console configuration information to a floppy diskette
1. Select Start, then Programs, then Remote Console, and then FDCOPY. The FD COPY panel will open.
2. Select Compress to FDD to copy the information to a floppy disk. When the Please Insert FD panel displays, select OK.
3. You can either use an empty high-density diskette, or you can use a diskette which has previously been used for the FD Copy function. Place the diskette in the floppy disk drive, then select OK.
4. If you are using a previously used diskette, the FD Status panel displays the directories and files. If you want to delete the directories and files from the floppy disk, select Yes. If you want to keep the directories and files, select No. Note: If the floppy disk drive on your Remote Console PC is not designated as A:, select Compress to HDD to change the target file location.
5. The FD Copy program compresses the files. The status of the compression is displayed in the Progress panel
6. The FD Copy program then copies the compressed files to the floppy disk. The status of the copying is displayed in the Copy to FD panel .
7. If the floppy disk does not have enough space for the files, you will be prompted to insert another floppy disk. As with the first floppy disk, if you are using a previously used diskette, the FD Status panel displays the directories and files. If you want to delete the directories and files from the floppy disk, select Yes. If you want to keep the directories and files, select No.
8. Once the copying is finished, the FDCOPY Completed panel will display.